Pitney Bowes Epic - Friction Feeder Maintenance

Friction Feeder Maintenance
Performthesemaintenanceactivitiesdaily.
Note:
Allroutinemaintenancemustbeperformedwiththesystemloggedoff.
Required Tools
l Polycarbonatecovercleaner(902-F)
l Compressedair
Cleaning Covers and Clearing Paper Dust and Debris
1. WipedownthecoverswithPBapprovedcleaner(polycarbonatecovercleaner).
2. Openthefeedercovers.
3. Removematerialfromthefeederhopper.
4. Opentheclamshell.
5. Pulloutonthetwospringlatchesandpivottheoneattachedtothebridgeassemblyuptoopenthe
bridge;removeanymaterialifpresent.
6. Usetheairlinewiththeblowerattachmenttoblowdustanddebrisoutofthebridge.
7. Closethebridgeassembly.
8. Usetheairlinewiththeblowerattachmenttoblowdustanddebrisoutoftheclamshell.
9. Raisethefeeder.
10. Usetheairlinewiththeblowerattachmenttoblowdustanddebrisfromthefeederdeck.
11. Lowerthefeeder.
12. Closetheclamshell.
13. Closethefeedercover.
Maintenance
Pitney Bowes Epic Select Operator Guide December,2017 Page 241 of 288