Pitney Bowes Epic - Page 126

4. Turnthesideguideadjustmentknobcounterclockwiseuntiltheguidesareagainsttheinsert
material.(Allow a 1/16-inch (1.6mm) gap between each side of the material and side guide.)
AdjustingtheSideGuides(1/16-inch/1.6mmgap)
5. Tightenthesideguidelockdownknobs.
6. Removethematerial.
Operator Adjustments
Pitney Bowes Epic Select Operator Guide December,2017 Page 120 of 288