Pitney Bowes Epic - Page 161

4. Whenthedialogopens,clicktheSepSetuptab.
5. Selecttheappropriateseparatorsetupoptionsforthefrictionfeeders:
l EnableBackup:thisoptioncasuestheseparatorrollertorotateslightlywitheachpieceto
avoidflatspots.(This feature must be turned off if a stone separator is being used.)
l SynchronousMode:thisoptionhelpswithdifficultinsertsthattendtoshingleorskew;with
thisoptiontheyareseparatedwithoutstopping,beforetheleadedgereachesthenips.
l TwistedReturnEnvelopes:thissettingcanhelpifyouarehavingtroublefeedingbadly
twistedenvelopes;whenset,insertsarefedfurtheroutfromundertheweightofthestack
whenseparating.
l Acceleration:thisfeaturecontrolshowfasttheseparatorbeltsspinatstartup.

o
Thelower thenumber,theslower thebeltsturn

o
Thehigher thenumber,thefaster thebeltsturn
6. Afteryoumakeyourselections,clickOK.
Operator Adjustments
Pitney Bowes Epic Select Operator Guide December,2017 Page 155 of 288