Pitney Bowes Epic - Page 164

Job Changeover Guidelines
Theremaybeareasofthesystemthatyouneedtoadjustwhenyouarepreparingtochangeoverto
anotherjobwithdifferentmaterial.Changeoveradjustmentsmayberequiredifthenewjobyouare
abouttorunhasmaterialthatisadifferentorientation(portraitorlandscape),sizeormaterialthickness
thanthepreviousjob.
Usethistableasaguidelinetohelpidentifywhat,ifany,adjustmentsyouneedtomakeforajob
changeover.Someoftheseadjustmentsthesystemperformsautomatically,andsomeanoperator
performsmanually.Refertothe"OperatorAdjustments"chapterinthisguidefordetailedprocedures.
*-autoadjust
x=manualadjustment
MailerEnvelope-
changessizeorstyle
Insert-changessizeor
thickness
ControlDocument-
changeslength,width,
thickness
EnvelopeFeeder   
Separator Gap x  
Fence Rollers x  
Engine Setup GUI Screen x  
   
Engine   
Pocket Width *  
Horn Position *  
Horns Style / Thickness x x x
Suction Cup Location x  
Tongue Position x  
Tongue Height  x x
Observation Guides x

 
Backwall *  
Job Changeover Guidelines
Pitney Bowes Epic Select Operator Guide December,2017 Page 158 of 288