Pitney Bowes Epic - Page 219

Remove or Add Vertical Stacker Side Guide
Toremoveoraddaverticalstackersideguide:
1. Loosenboththumbscrewsthatholdtheguideinplace.
2. Graspthesideguideandslideittotheleftofthecrossbars.
3. Lifttherightsideandremovetheguidefromthemodule.
Adjust a Vertical Stacker Side Guide
Toadjustthepositionofaverticalstackersideguide:
1. Loosenboththumbscrewsandslidetheguideonthebarstothedesiredposition.
2. Tightenthethumbscrews.
Note:
Whenrunningflats,removetheguidesfromallverticalstackersbeforetheflatsconveyorstacker.
Error Recovery
Pitney Bowes Epic Select Operator Guide December,2017 Page 213 of 288