Pitney Bowes Epic - Page 68

7. Slidethetongueassemblysoitis1/8"(3mm)fromtheedgeoftheenvelopethroat.
Item Description
1 TongueAssembly
2 EnvelopeThroat
3 1/8"(3mm)gapbetweentongueandthroat
PositionTongueAssembly
8. Tightenthelockdownscrews.
9. Removetheenvelope.
10. Lowertheupperengine.
11. Closetheenginecover.
Operator Adjustments
Pitney Bowes Epic Select Operator Guide December,2017 Page 62 of 288