Pitney Bowes Epic - Page 70

4. Placethethickestcollation(orlargestnumberofpanels)underthetongue.
TonguetoCollationLocation
5. Closetheupperengineandwiththecollationunderthetongue,adjustthetongue(upordown)so
thereisanodrag,toabouta1to2mmgap.
SmallGap(1to2mm)betweenTongueandCollation
6. Removeallmaterialfromunderthetongueandinsertarea.
7. Lowertheupperengine.
8. Closetheenginecover.
Operator Adjustments
Pitney Bowes Epic Select Operator Guide December,2017 Page 64 of 288