Pitney Bowes Epic - Page 81

6. Holdtheenvelopeinposition(shownabove)andlocatetheflapdeltascaletoeithertherightorleft
ofthecenter.Recordthemeasurementseenwheretheflapcrossesthisscale.
l Leftsideofthescaleisininchesansshouldberecordedas.1,.2,.3,.4,.5,.6,.7,etc.
l Rightsideofthescaleisinmillimeters.
InthisExample-FlapDeltais.7inches
7. EnterthevalueoftheFlapDelta(measuredinstep#6)intheEngineSetupscreen.

Operator Adjustments
Pitney Bowes Epic Select Operator Guide December,2017 Page 75 of 288