Pitney Bowes Epic - Page 95

6. Taketheouterguide(non-operatorside),positionit1/4-inchfromthetopseamoftheenvelope
andusetheoperatorsetuptooltotightentheAllenscrews.
Item Description
1 Non-operatorSideGuide(outer)
2 TopSeamofEnvelope
3 1/8-inchGap
4 OperatorSideGuide(inner)
PositioningoftheInnerandOuterGuides
7. Taketheinnerguide(operatorside)andpositionit1/4-inch(6.3mm)awayfromthebottomseam
oftheenvelopeandusetheoperatorsetuptooltotightenthecapheadscrews.
Operator Adjustments
Pitney Bowes Epic Select Operator Guide December,2017 Page 89 of 288