Pitney Bowes Relay 5000 - Reviewing a Scan Configuration; Viewing the Job List

8-22 SV63136 Rev. A
8 • Scanning
Reviewing
a Scan
Configuration
If necessary, you can view a list of marks associated with the Scan Configu-
ration without entering the Edit mode.
NOTE: This option is only available if the PC Control is set to No.
1. From the Home screen, select Menu>Tools.
2. Select Configure System>Scan Configuration Setup.
NOTE: If you are not logged in with supervisor or manager access rights, you
will be prompted to enter an access code.
3. Select the appropriate scan type.
4. The scan configurations for the selected scan type display. Use the UP/
DOWN arrow keys to select the scan configuration you want to review.
5. Select Review Highlighted Item.
6. The Review Scan Code screen displays. The marks associated with the
configuration appear in the Functions list. Use the UP/DOWN arrow keys
to select the function you want to review.
7. Select Finished once you have reviewed the list.
Viewing the Job
List
View the jobs associated with the selected scan configuration.
NOTE: This option is not available if there are no jobs associated with the se-
lected Scan Conguration.
1. From the Home screen, select Menu>Tools.
2. Select Configure System>Scan Configuration Setup.
NOTE: If you are not logged in with supervisor or manager access rights, you
will be prompted to enter an access code.
3. Select the appropriate scan type.
4. The scan configurations for the selected scan type display. Use the UP/
DOWN arrow keys to select the scan configuration with the job list you
want to view.
5. Select View Job List for Highlighted Item.
6. The View Job List screen displays. Use the UP/DOWN arrow key to
scroll through the job list.
7. Select Cancel to return to the Scan Configuration screen.