2-22 SV63136 Rev. A
2 • Meet the Inserting System
When the Login Required Mode is enabled, entry of a user ID and
password is needed to access the system. When Login Not Required
Mode is enabled, entry of an access code is needed to access restricted
functions.
NOTE: The Manager assigns the user ID and password or access code. User
IDs can contain alphanumeric characters; access codes and passwords must be
numeric only.
Access Rights
(continued)
If one of the two security modes is enabled on your system, you must log in
to perform operator functions:
1. The Select User screen displays. Select the appropriate user ID.
NOTE: If necessary, press Next to view additional user IDs.
2. Enter your password.
NOTE: Passwords are four-digit numeric codes. Numbers 1, 2, 3, 4 and 5
display on the rst screen. Press "Next" to access numbers 6, 7, 8, 9, and 0.
3. Press Accept once you have entered your password. The Home screen
displays.
If Login Not Required Mode is enabled on your system and user IDs and
passwords have been set up by the manager, the log in option displays on
the Home screen.
Logging In
Logging Out
To log out of the system: on the Home screen, select Log Out.
NOTE: You must log out of the system in order for the next operator to log in.
To Next Page
Loading...
