SV63136 Rev. A
2-13
Meet the Inserting System • 2
Resetting the Batch Counter
The batch counter counts up to a set number. It increments one count for
each completed mail piece that the system detects. The system stops when
it reaches the batch count.
To reset the desired number for the job:
1. Press RESET COUNTERS to display the Reset Counters screen.
2. Select Batch Count.
3. You are returned to the Home screen. The batch counter at the bottom
of the screen returns to its original setting.
NOTE: The original setting for the batch counter can contain up to four digits; the
minimum is 5 and the maximum is 9999.
Resetting the Mark Piece Count
The Mark Piece Count selection allows you to reset the counter for the
envelope edge mark to zero.
1. Press RESET COUNTERS to display the Reset Counters screen.
2. Select Mark Piece Count.
3. You are returned to the Home screen. The counter will be reset to zero.
Resetting Both Counters
The Reset Both selection allows you to reset both the piece counter and the
batch counter to zero.
1. Press RESET COUNTERS to display the Reset Counters screen.
2. Select Both.
3. You are returned to the Home screen. The piece counter at bottom of the
screen will read "0" and the batch counter returns to original setting.
Help
Select Help for information about the screen that currently displays and for
access to the entire Help file.
Cancel
Select Cancel to return to the previous screen.
NOTE: If you made changes to a job before pressing Cancel, you are prompted
to save the changes. Press "Yes" to save the changes; press No to delete the
changes and to return to the last screen in which you saved changes. Be aware
that once you delete the changes, they are permanently gone.
Home
Select HOME to return to the Home screen for the current job. The current
job automatically includes any changes made while editing the job. Changes
are not saved until you choose "Save Job". Jobs that were changed but not
saved have an asterisk (*) next to the job name (top of the Home screen).
Fixed Function
Keys (continued)
To Next Page
Loading...
