Pitney Bowes Relay 5000 - Adding an Item (Continued)

3-44 SV63136 Rev. A
3 • Basic Operation
Adding an Item
(continued)
6. If you selected Add Outer Envelope the Add Envelope screen displays.
a. Use the screen option keys to define the new envelope parameters
b. Select the desired item characteristics
c. Press Accept when you are done.
7. If you want to add more items, repeat steps #1 - 5, as necessary, for
each new item.
NOTE: If you decide that you don't want the changes that you've made,
press CANCEL. The Conrm Cancel prompt displays. Press Don't Keep
Changes to discard the new entries. You will be returned to the Edit Job
screen.
8. To retain your changes for this job, select Accept in the Edit Job screen.
9. To store the job changes permanently, select Save Job in the Menu
screen. (This requires supervisor or manager access to save a job.)
NOTE: Recheck the Mail Piece Icon Tree. Moving an item can cause the
feeder assignment to change. If it does, be sure to load the designated item
into the correct Feeder.