SV63136 Rev. A
8-45
Scanning • 8
SQ (Select Quantity): Allows the user, with dedicated scan marks on the control
document, to have more than one insert fed from a specific
tray from the Tower. This features works as a Page Count
scan mark without the Insert being controlling. SQ items
can be inserts only, not sheets (i.e. only the tower feeders
can be used). SQ items are not themselves scanned. No
feeder to feeder matching.
JID (Job ID) The Job ID function has been added to the C39 , I25 and
2D Data Matrix barcodes but is not implemented as an
OMR feature. The Job ID is a string-based function rather
than a number-based function and is typically a 6 or 8
digit number that remains constant throughout the job.
This allows it to be used to verify that all pieces that are
processed belong to the same job. The Job ID acts as a
match string even when not running file based. When Trial
Piece is pressed, the Job ID will be read from the first piece
and then compared to the job ID numbers of the rest of the
run. If the Job ID number changes within the same job, the
system will stop processing the material and display a error
stating a Job ID mismatch.
USR (User Data) Use the User Defined scan code function to ignore
customer data at the end of a barcode. Example: a
customer could place an account number on the end of
their barcode. We cannot currently process this data, but by
using the USR function we can account for the digits on the
end of the barcode.
MK (Mark Piece) The mark piece function activates the edge marker on the
flats sealer. This feature is used to mark the side of the
envelopes that exit the inserter by the top letter path. The
inserter system does not have the ability to mark the larger
catalogue style envelopes that exit the system by the lower
path.
MS (Match String) This mark is used to keep documents from one collation
together similar to match code except that this function
allows alphanumeric characters.
Enhanced
Integrity Level
(continued)
To Next Page
Loading...
