Pivot3 X5-6500 - Protected Host; Host Access Group

To Next Page

To Previous Page

X-Series Hyperconverged Nodes Powered by Acuity

Setup & User Guide, v1.0

DOC-246-GDE-Pivot3 Acuity 2.3 Setup & User Guide-v1.0.docx

Enter the Administrator credentials to be used on the web server determined in Step 6. Even for Single Sign-

On setup, Pivot3 credentials still need to be entered here. The default username for Single Sign-On is

pivot3ssouser, and the password can be custom-set. The default Single Sign-On username cannot be

changed; only the password can be modified.

NOTE: For this step, the password will not be obscured, so ensure all credentials are accurate before clicking Next

Enter the local IP address and port for the vSMS Web Server to listen on.

NOTE: The address and port must be accessible from the vCenter Server.