X-Series Hyperconverged Nodes Powered by Acuity
Setup & User Guide, v1.0
17
|
DOC-246-GDE-Pivot3 Acuity 2.3 Setup & User Guide-v1.0.docx
Configure SSH
To Enable or Disable SSH, log in to the main ESXi screen and use the arrow keys to navigate to
Troubleshooting Options. Press Enter to select.
The SSH option provided will differ depending on whether SSH has already been enabled on this machine.
Press
Enter to activate the desired state and press Esc to exit the dialog.
To Next Page
Loading...