X-Series Hyperconverged Nodes Powered by Acuity
Setup & User Guide, v1.0
| 36
DOC-246-GDE-Pivot3 Acuity 2.3 Setup & User Guide-v1.0.docx
Sync VMs with Host Upon Creation (Recommended)
Configuration Process
# Configuration Task Procedure Details / Expected Results
1 Synchronize guest time with host
Create VM > Ensure VMware Tools are Installed >
Right-click VM > Edit Settings…
NOTE: VMware tools are not installable on the Pivot3 VM directly
. This is expected behavior; any error messages
noting that “VMware Tools are not installed on this virtual machine” can be disregarded.
To Next Page
Loading...