Polaris RZR XP 1000 - Cooling System Pressure Test; Cooling System Hoses; Maintenance

2
2.27
9925724 R01 - 2014-2015 RZR XP 1000 / RZR XP4 1000 Service Manual
© Copyright 2014 Polaris Industries Inc.
8. Fill recovery bottle to MAX level with recommended
coolant or 50/50 or 60/40 mixture of antifreeze and
distilled water as required for freeze protection in
your area.
Recommended Coolant:
Polaris Premium Pre-Mixed Antifreeze
PN 2871534 (Quart)
PN 2871323 (Gallon)
9. Reinstall the recovery bottle cap.
10. If coolant was required, start engine and check for
leaks. Make sure radiator fins are clean to prevent
overheating.
Cooling System Pressure Test
Refer to ENGINE COOLING SYSTEM, page 3.13.
Cooling System Hoses
1. Inspect all vehicle hoses for cracks, deterioration,
abrasion or leaks. Replace if necessary.
ITEM
DESCRIPTION
1
Recovery Bottle
2
Engine Hoses
3
Radiator Hoses
4
To Thermostat Housing
5
To Waterpump
6
To Radiator
MAINTENANCE