EasyManua.ls Logo

Polycom CX5500

Polycom CX5500
386 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 229
The following table lists the supported TLVs.
Supported TLVs
No
Name
Type(7
bits) [0-6]
Length (9 bits) [7-15]
Type
Length
Org. Unique
Code (3 bytes)
Sub
Typ
e
1
Chassis-Id
1
1
6
0x0206
-
5
IP address of phone (4 bytes). Note that 0.0.0.0 is not sent until the phone has a valid IP address.
2
Port-Id
1
2
7
0x0407
-
3
MAC address of phone (6 bytes)
3
TTL
3
2
0x0602
-
-
TTL value is 120/0 sec
4
Port description
4
1
0x0801
-
-
Port description 1
5
System name
5
min len > 0, max len <=
255
-
-
-
6
System description
6
min len > 0, max len <=
255
-
-
-
Manufacturer’s name - “Polycom”; Refer to Error! Reference source not found.; Hardware version; Application
ersion; BootROM version
7
Capabilities
7
4
0x0e04
-
-
System Capabilities: Telephone and Bridge if the phone has PC port support and it is not disabled.
Enabled Capabilities: Telephone and Bridge if phone has PC port support, it is not disabled and PC port is
connected to PC.
8
Management
Address
8
12
0x100c
-
-
Address String Len - 5, IPV4 subtype, IP address, Interface subtype - “Unknown”, Interface number - “0”, ODI
string Len - “0”
9
IEEE 802.3
MAC/PHY
config/status
1
127
9
0xfe09
0x00120f
1
Auto Negotiation Supported - “1”, enabled/disabled, Refer to PMD Advertise and Operational MAU.
10
LLDP-MED
capabilities
127
7
0xfe07
0x0012bb
1
Capabilities - 0x33 (LLDP-Med capabilities, Network policy, Extended Power Via MDI-PD, Inventory) Class Type
III
Note: Once support for configuring location Identification information is locally available:
Capabilities - 0x37 (LLDP-Med capabilities, Network policy, Location Identification, Extended Power Via MDI-PD,
Inventory) Class Type III

Table of Contents

Other manuals for Polycom CX5500

Related product manuals