Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 230
Org. Unique
Code (3 bytes)
ApplicationType: Voice (1), Policy: (Unknown(=1)/Defined(=0) Unknown, if phone is in booting stage or if switch
doesn't support network policy TLV. Defined, if phone is operational stage and Networkpolicy TLV is received
from the switch.), Tagged/Untagged, VlanId, L2 priority and DSCP
ApplicationType: Voice Signaling (2), Policy: (Unknown(=1)/Defined(=0) Unknown, if phone is in booting stage or if
switch doesn't support network policy TLV. Defined, if phone is operational stage and Networkpolicy TLV is
received from the switch.), Tagged/Untagged, VlanId, L2 priority and DSCP.
Note: Voice signaling TLV is sent only if it contains configuration parameters that are different from voice
parameters.
ApplicationType: Video Conferencing (6),Policy: (Unknown(=1)/Defined(=0). Unknown, if phone is in booting stage
or if switch doesn't support network policy TLV. Defined, if phone is operational stage and Networkpolicy TLV is
received from the switch.), Tagged/Untagged, VlanId, L2 priority and DSCP.
Note: Video Conferencing TLV is sent only from Video capable phones.
LLDP-MED location
identification
3
min len > 0, max len <=
511
ELIN data format: 10 digit emergency number configured on the switch. Civic Address: physical address data such
as city, street number, and building information.
PowerType -PD device PowerSource-PSE&local Power Priority -Unknown PowerValue.
LLDP-MED
inventory hardware
revision
min len > 0, max len <= 32
Hardware part number and revision
LLDP-MED
inventory firmware
revision
min len > 0, max len <= 32
LLDP-MED
inventory software
revision
min len > 0, max len <= 32
Application (SIP) revision
LLDP-MED
inventory serial
number
min len > 0, max len <= 32
MAC Address (ASCII string)