Polycom CX5500 Administrator's Guide

Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 251
Parameter
Permitted Values
Default
device.sec.TLS.profile.profileSelection.dot1x
PlatformProfile1,
PlatformProfile2
Null
Choose the TLS Platform Profile to use for 802.1X, either TLS Platform Profile 1 or TLS Platform Profile 2.
device.sec.TLS.profileSelection.provisioning
1
PlatformProfile1,
PlatformProfile2
Null
The TLS Platform Profile to use for provisioning, either TLS Platform Profile 1 or TLS Platform Profile 2.
device.sec.TLS.profileSelection.syslog
1
PlatformProfile1,
PlatformProfile2
Null
The TLS Platform Profile to use for syslog, either TLS Platform Profile 1 or TLS Platform Profile 2.
device.sec.TLS.prov.strictCertCommonNameValidation
0 or 1
1
If set to 1, provisioning always verifies the server certificate for commonName/SubjectAltName match with the
server hostname that the phone is trying to connect.
device.sec.TLS.syslog.strictCertCommonNameValidation
0 or 1
1
If set to 1, syslog always verifies the server certificate for commonName/SubjectAltName match with the server
hostname that the phone is trying to connect.
device.sntp.gmtOffset
-43200 to 46800
Null
The GMT offset—in seconds—to use for daylight savings time, corresponding to -12 to +13 hours.
device.sntp.serverName
dotted-decimal IP
address or domain name
string
Null
The SNTP server from which the phone will obtain the current time.
device.syslog.facility
0 to 23
Null
A description of what generated the log message. For more information, see section 4.1.1 or RFC 3164.
device.syslog.prependMac
1
0 or 1
Null
If 1, the phone’s MAC address is pre-pended to the log message sent to the syslog server.
device.syslog.renderLevel
1
0 to 6
Null
Specify the logging level that will display in the syslog. Note that when you choose a log level, you are including
all events of an equal or greater severity level and excluding events of a lower severity level. The logging level
you choose determines the lowest severity of events that will be logged.
0 or 1: SeverityDebug(7). 2 or 3: SeverityInformational(6). 4: SeverityError(3). 5: SeverityCritical(2). 6:
SeverityEmergency(0).
device.syslog.serverName
dotted-decimal IP
address OR domain
name string
Null
The syslog server IP address or domain name string.
device.syslog.transport
None, UDP, TCP, TLS
Null
The transport protocol that the phone will use to write to the syslog server. If set to None, transmission is turned
off but the server address is preserved.

Polycom CX5500 Specifications

General

Field of View	360 degrees
Camera Resolution	1920 x 1080
Microphone Range	12 feet (3.6 meters)
Connectivity	USB
Audio Bandwidth	160 Hz to 22 kHz
Speaker	Built-in speaker
Compatibility	Microsoft Lync, Microsoft Skype for Business