Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 250
device.sec.TLS.customCaCert1 (TLS Platform Profile 1)
device.sec.TLS.customCaCert2 (TLS Platform Profile 2)
The custom certificate to use for TLS Platform Profile 1 and TLS Platform Profile 2 and TLS Application Profile 1
and TLS Application Profile 2 device.sec.TLS.profile.caCertList must be configured to use a custom
certificate.
Custom CA certificate cannot exceed 4096 bytes total size.
device.sec.TLS.customDeviceCert1.publicCert
device.sec.TLS.customDeviceCert2.publicCert
Enter the signed custom
device certificate in PEM
format (X.509)
device.sec.TLS.customDeviceCert1.privateKey
device.sec.TLS.customDeviceCert2.privateKey
Enter the corresponding
signed private key in
PEM format (X.509)
device.sec.TLS.customDeviceCert1.set
device.sec.TLS.customDeviceCert2.set
Note that you use a single .set parameter to enable or disable only these two related <device/> parameters
- device.sec.TLS.customDeviceCertX.publicCert and
device.sec.TLS.customDeviceCertX.privateKey. All other <device/> parameters have their own
corresponding .set parameter that will enable or disable that parameter.
Size constraints are: 4096 bytes for the private key, 8192 bytes for the device certificate.
device.sec.TLS.profile.caCertList1 (TLS Platform Profile 1)
device.sec.TLS.profile.caCertList2 (TLS Platform Profile 2)
Builtin,
BuiltinAndPlatform1,
BuiltinAndPlatform2, All,
Platform1, Platform2,
Platform1AndPlatform2
Choose the CA certificate(s) to use for TLS Platform Profile 1 and TLS Platform Profile 2 authentication:
The built-in default certificate
The built-in and Custom #1 certificates
The built-in and Custom #2 certificates
Any certificate (built in, Custom #1 or Custom #2)
Only the Custom #1 certificate
Only the Custom #2 certificate
Either the Custom #1 or Custom #2 certificate
device.sec.TLS.profile.cipherSuite1 (TLS Platform Profile 1)
device.sec.TLS.profile.cipherSuite2 (TLS Platform Profile 2)
The cipher suites to use for TLS Platform Profile 1 and TLS Platform Profile 2)
device.sec.TLS.profile.cipherSuiteDefault1 (TLS Platform
Profile 1)
device.sec.TLS.profile.cipherSuiteDefault2 (TLS Platform
Profile 2)
The cipher suite to use for TLS Platform Profile 1 and TLS Platform profile 2. If set to 0, the custom cipher suite
will be used. If set to 1, the default cipher suite will be used.
device.sec.TLS.profile.deviceCert1 (TLS Platform Profile 1)
device.sec.TLS.profile.deviceCert2 (TLS Platform Profile 2)
Builtin, Platform1,
Platform2
Choose the device certificate(s) for TLS Platform Profile 1 and TLS Platform Profile 2 to use for authentication.