EasyManuals Logo

Polycom CX5500 Administrator's Guide

Polycom CX5500
386 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #340 background imageLoading...
Page #340 background image
Polycom CX5500 Unified Conference Station Administrator’s Guide 1.1.0
Polycom, Inc. 340
Parameter
Permitted
Values
Default
voIpProt.SIP.header.warning.codes.accept
comma
separated list
Null
Specify a list of accepted warning codes.
If set to Null, all codes are accepted. Only codes between 300 and 399 are supported.
For example, if you want to accept only codes 325 to 330:
voIpProt.SIP.header.warning.codes.accept=325,326,327,328,329,330
Text will be shown in the appropriate language. For more information, see lcl_ml_lang_menu_x.
voIpProt.SIP.header.warning.enable
0 or 1
0
If set to 1, the warning header is displayed if received. If set to 0, the warning header is not displayed.
voIpProt.SIP.IM.autoAnswerDelay
0 to 40,
seconds
10
The time interval from receipt of the instant message invitation to automatically accepting the invitation.
voIpProt.SIP.keepalive.sessionTimers
0 or 1
0
If set to 1, the session timer will be enabled. If set to 0, the session timer will be disabled, and the phone will not
declare “timer” in “Support” header in an INVITE. The phone will still respond to a re-INVITE or UPDATE. The
phone will not try to re-INVITE or UPDATE even if the remote endpoint asks for it.
voIpProt.SIP.lcs
0 or 1
0
If 0, the Microsoft Live Communications Server (LCS) is not supported. If 1, LCS is supported. This parameter
can set for a specific registration using reg.x.lcs.
voIpProt.SIP.lineSeize.retries
3 to 10
10
Controls the number of times the phone will retry a notify when attempting to seize a line (BLA).
voIpProt.SIP.local.port
1
0 to 65535
5060
The local port for sending and receiving SIP signaling packets.
If set to 0, 5060 is used for the local port but is not advertised in the SIP signaling.
If set to some other value, that value is used for the local port and it is advertised in the SIP signaling.
voIpProt.SIP.ms-forking
0 or 1
0
If set to 0, support for MS-forking is disabled. If set to 1, support for MS-forking is enabled and the phone will
reject all Instant Message INVITEs. This parameter is applies when installing Microsoft Live Communications
Server.
Note that if any endpoint registered to the same account has MS-forking disabled, all other endpoints default
back to non-forking mode. Windows Messenger does not use MS-forking so be aware of this behavior if one of
the endpoints is using Windows Messenger.
voIpProt.SIP.mtls.enable
0 or 1
1
If 0, Mutual TLS is disabled. If 1, Mutual TLS is enabled. Used in conjunction with Microsoft Lync 2010.
voIpProt.SIP.musicOnHold.uri
a SIP URI
Null
A URI that provides the media stream to play for the remote party on hold. This parameter is used if
reg.x.musicOnHold.uri is Null.
Note: The SIP URI parameter transport is supported when configured with the values of UDP, TCP, or TLS.

Table of Contents

Other manuals for Polycom CX5500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polycom CX5500 and is the answer not in the manual?

Polycom CX5500 Specifications

General IconGeneral
Field of View360 degrees
Camera Resolution1920 x 1080
Microphone Range12 feet (3.6 meters)
ConnectivityUSB
Audio Bandwidth160 Hz to 22 kHz
SpeakerBuilt-in speaker
CompatibilityMicrosoft Lync, Microsoft Skype for Business

Related product manuals