Polyend Tracker Mini - 13.10 Hexadecimal Option; 13.11 Official Specifications

291
Polyend Tracker Mini Manual
290
Polyend Tracker Mini Manual
System
13
System
13
NOTESNOTES
13.11 Ofcial Specications
Audio Input:
• Unbalanced Stereo, TS (Tip-Sleeve)
• Line Input:
• Audio Input Impedance: 29 kOhm Impedance.
• Input level: 8.2 dBu peak
• Signal to Noise Ratio: 90 dB.
• Microphone Input:
• Microphone Input Impedance: 2.9 kOhm Impedance
• input level: 8.2 dBu peak.
Audio Output
• Line Output:
• Output level 9 dBu peak (when 10k Ohm Load).
• Signal to Noise Ratio: 97 dB.
• Headphone Output:
• Output level: 17.6 dB (when 16k Ohm Load)
• Signal to Noise Ratio: 98 dB.
13.10 Hexadecimal Option
The classic Tracker’s typically used hexadecimal number format. This can
be a little daunting if unfamiliar and especially in the more modern age and
therefore a decimal number format is used as default. However, maybe for
the more nostalgic users, numbering in hex mode is also an option.
▌ CHANGING BETWEEN DECIMAL & HEXADECIMAL VIEW.
1. Hold [Shift] + [4] or use [Menu] to select the ‘Cong’ Menu.
2. Press (Up) or (Down), 1
st
& 2
nd
Screen buttons to navigate to the
‘General’ menu. The (Up) (Down) buttons also can be used.
3. In the central window pane, Press (Up) or (Down), 4
th
& 5
th
Screen
buttons to navigate to the ‘Numbering mode’ option. The arrow keys can
be used to navigate in the central pane.
4. Press [Change], 6
th
Screen button. The options to change will appear.
5. Press (Up) or (Down) to select between ‘Decimal, Steps from 0’ to use
standard decimal numbers starting at step 0, ‘Decimal, Steps from 1’
where the decimal system is used and steps start at 1, and the
‘Hexadecimal’ option for a classic tracker view.
6. Press [Apply], 6
th
Screen button.
Hexadecimal to Decimal Converter
Hex 1 2 3 4 5 6 7 8 9 A B C D E F
Dec 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15