157
Polyend Tracker Mini Manual
156
Polyend Tracker Mini Manual
NOTESNOTES
7.18 Random FX
1
9
5
13
16
D6 03
----
V 0
D6 03 C 50 V 80
D6 03
----
V100
D6 03f 20 q 70
f 20 q 70
D6 03
----
V 55
90%50% 70%
0%
q - gate length
randomisation
Note On
Gate Length
Gate length value is randomised by +/-20 applied by FX1 to the default of 70 in
FX2. Therefore gate length value variation will be a value selected between 50 -
90 over each pattern cycle.
7.19 Random Volume
Default Level
+/- Range of variation
1
9
5
13
16
D6 03
----
v 10
---- ----
---- ----
---- ----
--- --
--- --
--- --
D6 03
----
v 20
Volume Level
100%
0%
1 5 9 132 6 10 143 7 11 154 8 12 16
Playback will be at the default volume until a random volume step is triggered. A value
somewhere in the range will then be applied.
FX1 Randomises the value for FX2 (q - gate Length)
Range is -10 to +10 deviation from current default
Range is -20 to +20 deviation from current default
FX Type Tag FX Type Tag
Value Ranges Value Ranges
FX Description FX Description
Example Example
Effect Effect
f v
0 to +/-255 0 to +/-100
Selects a random FX value (not type) for the FX located in the other slot, same
step. Plays a random selection each pattern cycle based on the set range.
Creates a volume variation in each cycle of the pattern through randomisation
of velocity. This is a value which is randomly selected from within a +/- range
from the default volume level.
This feature can add a variation to a pattern. For example FX1 Random 20
applies to FX2 Gate length, which will be the value randomised. Gate length
full range is 0-100%. FX2 Functions other than Gate Length can also be used.
This is useful for creating accents and audible variations in volume level.
Random FX Value Random Volume
FX Steps
7
FX Steps
7
To Next Page
Loading...
