Polyend Tracker Mini - Sequencing Steps; Dedicated Step Parameter Buttons

49
Polyend Tracker Mini Manual
48
Polyend Tracker Mini Manual
Menu Option Description Book Section
MIDI Clock In
Sets the source of the master clock, Internal
(default) or external USB or MIDI In jack.
MIDI
MIDI Clock Out
Sets the Tracker Mini clock output. Off, USB, MIDI
Out jack, USB + MIDI Out jack.
MIDI
MIDI Transport In
Sets the source of transport control commands,
Internal (default) or external USB or MIDI In jack.
MIDI
MIDI Transport Out
Sets the output of transport control commands, Off,
USB, MIDI Out jack or USB+MIDI jack options.
MIDI
MIDI Notes In
Sets the input routing of external notes in. Set to Off,
USB, MIDI In jack or USB+MIDI jack options.
MIDI
MIDI Notes Input Channel
Sets the MIDI channel for incoming notes from
external gear. Select All channels or Ch 1-16.
MIDI
MIDI MIDI Out
Sets the MIDI output routing between, Off, USB,
MIDI Out jack or USB+MIDI jack options.
MIDI
MIDI CC In
Sets CC (control change) input routing to Off, USB,
MIDI In jack, USB+MIDI In jack.
MIDI
MIDI CC In channel
Sets MIDI channel for CC (control change) incoming
messages. Select All channels or Ch 1-16.
MIDI
MIDI Middle C
Sets middle C as C-3, C-4, C-5, C-6. Calibrates
range in Tracker Mini with external gear.
MIDI
MIDI Clock Sync Correction
Latency compensation for incoming sync. -6 to +6.
Use with MIDI Jack or USB clock in.
MIDI
Metronome State Turns the metronome on or off for live recording. Projects
Metronome Pre Roll Provides a count in of 4 before starting to record. Projects
Metronome Time signature num Upper numerator of the time signature Projects
Metronome Time signature denum Lower denominator of the time signature Project
Metronome Volume Volume level of metronome Projects
Menu Option Description Book Section
Firmware Firmware Update
Activates a rmware update based on the OS
located on the SD card in the ‘rmware’ folder.
System
Firmware Current version
Displays current version of installed OS. Visual
indicator only.
System
Firmware Build Firmware build version display
Firmware Reset cong
Resets this conguration menu to the default
original settings.
System
Fn buttons binding Fn1 Sets the page associated with function button [1] System
Fn buttons binding Fn2 Sets the page associated with function button [2] System
Fn buttons binding Fn3 Sets the page associated with function button [3] System
Fn buttons binding Fn4 Sets the page associated with function button [4] System
Fn buttons binding Fn1+Shift
Sets the page associated with function button
combo [Shift] + [1]
System
Fn buttons binding Fn2+Shift
Sets the page associated with function button
combo [Shift] + [2]
System
Fn buttons binding Fn3+Shift
Sets the page associated with function button
combo [Shift] + [3]
System
Fn buttons binding Fn4+Shift
Sets the page associated with function button
combo [Shift] + [4]
System
Info - - General information and license details.
Projects
3
Projects
3