13.11 Save a Database Backup
Functionality:
Cancels and returns to Configuration Menu
Scans flash drive for free space
Description:
When the user may want to backup the PowerMaster
®
database for security purposes, place a
USB flash drive into one of the PowerMaster
®
’s USB peripheral ports. Next, press F3 to scan the
USB flash drive to verify enough space is required to save the database.
As an alternative, the user can run this process instead of downloading the database using Meter
Site Manager 2. Refer to the Meter Site Manager 2 Instruction Manual for further details.
NOTE: The USB Flash drive must be 2GB or smaller for the PowerMaster
®
to recognize the
device.
The following steps show the user how to backup the PowerMaster
®
in the field:
Rev 1.5 127
To Next Page
Loading...
Need help?
General