Database
The PowerMaster
®
has a built-in SQL database that can hold all information pertaining to the site
including (but not limited to) the meter, CT, PT, AMR, account number, address, substation, GPS
locator, billing multiplier, and when the site needs to be tested again. The user can easily select
a pre-loaded component (meter, CT, PT, etc.) from our large database or create a new
component to be associated to each metering site. Using the Meter Site Manager PC software,
this information along with data results can easily be synchronized to the master database or
formatted into a .csv or .txt file for exporting into the utility’s master database. The real power of
having a built-in database inside the PowerMaster
®
is the ability to create a daily "route" of tests
for the user that can be setup in the shop (or synched from Meter Site Manager) before going into
the field.
Hardware
The PowerMaster
®
can be stored in a compact Pelican case, which is waterproof, weather tight,
and extremely rugged. The large buttons are on a tactile key panel creating a splash-proof
membrane. A keyboard and mouse can be alternatively used instead of the key panel, which
allows the user the freedom of operating the PowerMaster
®
identical to a PC. Implementing a 5.7
inch, full color transflective VGA display allows the user to view the data and operate much easier
in full sunlight. It also prevents eye strain found in other products with small, black and white
displays.
Rev 1.5 17
To Next Page
Loading...
Need help?
General