PP Systems TARGAS-1 User Manual

TARGAS-1 Operation Manual V. 1.02 133 support@ppsystems.com
10
Host Measure Format
See MH Format
0 = Cal
1 = MH
2 = MD
3 = MM
4 = MW
1
11
Host Measure Interval
(seconds)
Time between records.
Use ‘0’ for manual mode
to stop broadcast.
0 - 3600
1
12
Memory Measure Format
See MM Format
n/a
n/a
13
Memory Measure Interval
(seconds)
Time between records
0 - 3600
0
14
WIFI Measure Format
See MW Format
n/a
n/a
15
WIFI Measure Interval
(seconds)
Time between records
0 - 3600
0 (Manual)
16
Display Measure Format
See MD Format
Note: Interval time is
always 1 second.
n/a
n/a
17
CRC
Determines whether a
CRC-8 will be appended
to each command sent
from the TARGAS. This
works for the Host only.
Note: the Display always
gets a CRC-8
0=Off; 1=On
0 (Off)
18
Web Monitor
Adds terminator to strings
sent to the WiFi Port to
use for web pages
0=Off; 1=On
1 (On)
19
Host Serial
Selects which Serial Host
input to use: the USB or
Wi-Fi (port2)
0 =USB
1 = Wi-Fi
0 (USB)
20
Chamber Volume
(cc)
The Volume of the
measuring chamber in
CCs
10-100000
1171
21
Chamber Area
(Cm^2)
The measuring Area of
the Chamber
1- 10000
78
22
CO2 limit (ppm)
The co2 sampling limit
1-1000
50
23
Time Limit (Sec)
The sampling time limit
10-300
60
24
Plot Number
Plot number (not saved in
EEprom)
Defaults to 1 on power up
1-1000
1
25
Used Absorber (mm^3)
The amount of absorber
material used in doing
zeros (mm^3)
0-100000
*
26
Absorber Volume (mm^3)
The number of ml the
Zero column holds
100-100000
20000
27
Syringe Volume
The sample volume of
gas (CCs)
1 - 1000
10

PP Systems TARGAS-1 Specifications

General

Brand	PP Systems
Model	TARGAS-1
Category	Measuring Instruments
Language	English