Precor TRM700-16 Base - Page 95

MC connector pin definitions
CONN
ID NAME PIN Description
INPUT MC AC INPUT PWR 1 EARTH GROUND
2 AC LINE 1- LINE AC LINE
3 AC LINE 2- NEUTRAL
MOTOR DRIVE MOTOR AC PWR OUT 1 MOTOR PHASE W
2 MOTOR PHASE V
3 MOTOR PHASE U
4 MOTOR PHASE W
5 MOTOR PHASE V
6 MOTOR PHASE U
COMM CONSOLE INTERFACE CABLE 1 DIGITAL GROUND
2 +8 VDC
3 TCD DATA OUTPUT
4 DIGITAL GROUND
5 +8 VDC
6 RXD DATA INPUT
7 DIGITAL GROUND
8 E-STOP
DBR
1
1
DYNAMIC BRAKE RESISTOR SENSE 1 THERMAL RESISTOR
SENSE
2 THERMAL RESISTOR
SENSE
MON MONITOR (ASL
2
PCA INTERFACE
CABLE)
1 +8 VDC
2 /BOOT_EN
3 TX
4 8V GND
5 D_RESET
1
Dynamic Brake Resistor The dynamic brake resistor dissipates power generated from the
main motor.
2
Active Status Light: Service and maintenance status light.
Experience Series 700 Line Treadmills
88
5 Replacement Procedures
Motor Controller (MC) Replacement