The mesh size of the protective grille is such that material can fall un‐
obstructed into the container, yet it guarantees protection for the ma‐
chine operator.
DANGER
Risk of death due to removed protective grille
Amputations resulting from the crushing, shearing, entanglement or
drawing of limbs into the rotating mixing apparatus.
▶
Make sure that the protective grille is fitted in every operating
mode.
▶
Fit the protective grille again every time maintenance work is
completed.
▶
Only operate the machine when the protective grille is closed.
▶
Do not reach through the protective grille or insert objects
through the grille.
WARNING
Danger due to defective protective grille
Sufficient protection cannot be guaranteed if protective grilles are
subjected to wear as a result of operation.
▶
Replace the protective grille if the residual material thickness of
the grille rods falls below 50%.
3.6.2 EMERGENCY STOP button (option)
Depending on the version and country of use, your machine may be
fitted with an EMERGENCY STOP button.
The EMERGENCY STOP button is fitted to the control cabinet of the
machine.
General technical description
3 — 8
To Next Page
Loading...
