WARNING
Danger to persons from the machine
▶
If situations arise during operation which could endanger per‐
sons, the machine must be stopped immediately by pressing
the EMERGENCY STOP button.
▶
After an EMERGENCY STOP, eliminate the danger before re‐
starting the machine.
NOTICE
Machine damage caused by incorrect actuation of the EMERGEN‐
CY STOP button
▶
Only press the EMERGENCY STOP button in the event of dan‐
ger.
▶
Do not use the EMERGENCY STOP button to normally switch
off the machine.
Familiarise yourself with the position of the EMERGENCY STOP
button(s) on your machine.
Figure 7: EMERGENCY STOP button
Pressing the EMERGENCY STOP button triggers the following ac‐
tions:
● The pump stops.
● The motor is switched off.
● All control panels and switch boxes are electrically locked.
To cancel the EMERGENCY STOP status, unlock the depressed
EMERGENCY STOP button by turning it.
General technical description
3 — 9
To Next Page
Loading...
