In optional mode Differential Weighing ( ):
From the [Normal] home screen:
1. Place the stack of mail to process on the Weighing Platform, then follow the
instructions on the screen or the steps below.
2. Remove the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen and starts motors automatically.
3. To print the imprint, insert the mail piece into the base against the rear-guide wall,
with the side to be printed facing upwards.
If a mail piece is bigger than mail path maximum thickness,
press to print a label. The label is printed. To know the
maximum thickness, see Mail Specifications on page 315.
4. The Mailing System applies postage and the mail piece (or label) is sent to the
catch tray.
5. Repeat the previous step for each piece of mail.
To quit the process at any time, press .
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can
answer Yes or No.
In optional mode Differential Weighing Automatic Label ( ):
From the [Normal] home screen:
1. Place the stack of mail you to process on the weighing platform, and then follow
the instructions on the screen or the steps below.
46
| Page 46 | Jun-21-2021 12:11 |
3
Processing Mail
To Next Page
Loading...
Need help?
General
