2. Remove the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen, starts motors and prints the label
automatically.
If you inadvertently remove more than one item from the WP,
replace removed items on WP before weight stabilisation to
avoid printing label (about 1.5 seconds).
3. Repeat the previous step for each piece of mail.
To quit the process at any time, press .
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can
answer Yes or No.
In other modes (Manual Weight Entry , no weight ...):
From the [Normal] home screen:
1.
Press . System motors start running.
2. Insert the envelope into the mail path against the rear-guide wall, side to be printed
facing upwards.
If a mail piece is bigger than mail path maximum thickness,
press to print a label. The label is printed. To know the
maximum thickness, see Mail Specifications on page 315.
3
Processing Mail
47
| Page 47 | Jun-21-2021 12:11 |
To Next Page
Loading...
Need help?
General
