Default Impression Settings9.9
The Default Impression Settings that can be changed include:
•
Default Impression Preferences: Sets the Default Postage Rate and the Slogan
Type that is activated automatically each time a User begins to set up a Job Run.
•
Automatic Date Advance: Allows you to print to a future date on your mail.This is
useful if you process mail after the last mail pickup for the day. This ensures that the
proper Date of Mailing is printed for the next day’s mail pickup.
•
Printing Offset: Sets the Default Offset print position from the right edge of the
envelope.
Default Impression Settings
There are two Default Impression Settings that you can change as needed.These settings
include:
•
The Default Slogan.
•
Automatic Date Advance.
•
The Default Postage Rate.
When viewing lists that appear on your screen, the check mark indicates a Default
Impression Setting.
Changing the Default Postage Rate
How to Change the Default Postage Rate
To change the Default Postage Rate:
1. Log in as the Supervisor (see How to Log in as the Supervisor on page 114 ), then
Press and type 3.3.3
Or
Select the path: Default User Settings Default Impression Preferences
Default Rate
2. The following message is displayed : To default a rate, press[OK].
Press [OK] to accept.
132
| Page 132 | | |
9
Configuring your Mailing System