CHAPTER TITLE WEB GRAPHICAL USER INTERFACE (GUI) FOR ESMS
4-38
Procedure:
1. In the Alert Policy Tab, select the slot for which you have
to configure the Alert policy. That is, In the Event Filter
Entry Page, if you have chosen Alert Policy number as 4,
you have to configure the 4th slot (the slot with Policy
Number 4) in the Alert Policy Tab.
2. Select the slot and click Add to open the Add Alert Pol-
icy Entry Page as shown in the screenshot below.
Figure 4-27. Add Alert Policy Entry Page
3. Policy Entry # is a read only field.
4. Select the Policy Number from the list.
5. In the Policy Configuration field, check Enable if you
wish to enable the policy settings.
6. In the Policy Set field, choose any of the Policy set from
the list.
7. In the Channel Number field, choose particular channel
from the available channel list.
8. In the Destination Selector field, choose particular desti-
nation from the configured destination list.
9. In the Alert String field, enable the check box if the Alert
policy entry is Event Specific.
10.In the Alert String Key field, choose any one value that is
used to look up the Alert String to send for this Alert Pol-
icy entry.
11.Click Add to save the new alert policy and return to Alert
Policy list.
12.Click Cancel to cancel the modification and return to Alert
Policy list.
13.In the Alert Policy list, to modify a configuration, select the
slot to be modified and click Modify.
Add
To save the new alert policy and return to Alert
Policy list.
Modify To modify the existing entries.
Cancel
To cancel the modification and return to Alert
Policy list.
Table 4-25: PEF Management - Alert Policy (Continued)
I
TEM DESCRIPTION
To Next Page
Loading...
