780C Multi-Interface Interoperability Tester – User Guide Page 114
4. Touch select the Read activation button to initiate the test.
5. Alternatively you can run this test from the command line as follows:
AUDA:RPTP?
An example of the results are shown below:
Audio InfoFrame data:
Channel count: 2 channels
Coding type: 0 (Refer to stream header)
Word length: Refer to stream header
Sampling freq.: Refer to stream header
Channel allocation:
--- --- --- --- --- --- FR FL
Channel status bits:
Application: Consumer
Sample words: LPCM
Copyright asserted: Yes
Format info: Default
Mode: 0
Category code: 00
Source number: 0
Channel number: 0
Sampling freq.: 48 KHz
Word length: 24 bits)
To Next Page
Loading...
