Radius GM300 - Page 7

October, 1996 6880902Z36-B
iii
GM300 Radio Service Software Manual Table of Contents
8
Menus and Screens
8-1
8.1 Overview 8-1
8.2 Main Menu 8-2
8.3 Service Menu 8-3
8.4 Get/Save Menu 8-4
8.5 Change/View Codeplug Menu 8-5
8.6 Print Menu 8-8
8.7 File Maintenance Menu 8-9
8.8 Setup Computer Configuration Menu 8-10
9
Servicing Features
9-1
9.1 Overview 9-1
9.1.1 Configuring the Alignment and Calibration Equipment 9-1
9.1.2 Service Menu Screen 9-3
9.1.3 Alignment versus Calibration 9-4
9.2 Alignment 9-4
9.2.1 Transmitter Deviation Alignment (F3) 9-5
9.2.2 Reference Oscillator Warp Adjustment (F5) 9-6
9.2.3 Transmitter Power Alignment (F7) 9-7
9.3 Calibration 9-8
9.3.1 Calibration After Board Replacement (F6) 9-8
9.3.2 Replaced Logic Board or RF Board (F2) 9-8
9.3.3 Reference Crystal Data (F2) 9-11
9.3.4 Transmitter Power Set (F3) 9-12
9.3.5 Reference Oscillator Alignment (F4) 9-13
9.3.6 Calibrate Power (F5) 9-14
9.3.7 Calibrate Deviation (F6) 9-15
9.3.8 Calibrate Total Deviation with PL (F7) 9-16
9.3.9 Calibrate Total Deviation with DPL (F8) 9-17
9.3.10 Replaced Power Amplifier Board (F4) 9-18
10 Appendices 10-1
10.1 Appendix A - Error Code Explanations 10-2
10.2 Appendix B - Troubleshooting 10-3
10.3 Appendix C - TPL/DPL Tables 10-4
10.4 Appendix D - Feature Performance Specifications 10-5
10.5 Appendix E - Timing Diagrams 10-8
10.6 Appendix F - Alert Tone Tables 10-10
10.7 Appendix G - Quik Call II Tone Tables 10-11
10.8 Appendix H - Accessory Package Defaults 10-13
10.9 Appendix I - Radio Personality Form 10-16
11 Glossary 11-1