Accessory Connector (16 Channel Models Only) GM300 Radio Service Software Manual
6-16 6880902Z36-B October, 1996
Customizing the Expanded Accessory Connector
6
Public Address
RSS LOCATION
DEFINITION This package is designed for use with public address systems. The speaker output
is routed to the public address system. In addition, transmit capability is such that
the broadcaster's voice is only heard on the public address speaker system.
DEFAULT/CHOICES Refer to Table 10-17 on page 10-13 in Appendix H for defaults.
IMPORTANT NOTE Public Address can also be installed on 8-channel model radios.
SEE ALSO External Accessories, Internal Accessories, DTMF Decoder Board
PROGRAMMING PROCEDURE
1. Press F4 at the MAIN MENU to get to the
CHANGE/VIEW CODEPLUG MENU.
4. Use the ↑ ↓ arrow keys to select Public
Address.
2. At the CHANGE/VIEW CODEPLUG MENU,
press F2 to get to the RADIO-WIDE screen.
5. To customize the accessory package, press F9 to
get to the ACCESSORY CONNECTOR CON-
FIGURATION screen and make the desired
changes.
3. Press Tab or Enter/Return until the Acc. Exter-
nal field is highlighted.
MAIN
MENU
➠
F4
➠
F2
CHANGE/
VIEW
➠
Tab
RADIO
WIDE
Acc. External
field
To Next Page
Loading...
