Basic Features GM300 Radio Service Software Manual
4-12 6880902Z36-B October, 1996
GM300 Features
4
T
ime-Out Timer (TOT) Rekey Time
RSS LOCATION
DEFINITION The wait time before transmitting after reaching the maximum allotted time for
continuous transmission. Ensures that time is available after reaching the maxi-
mum allotted time for continuous transmission for other conversations to begin.
DEFAULT/CHOICES Default: OFF
Choices: ■ OFF ■ 6 sec
RECOMMENDATIONS Use to keep one user from continuously transmitting and thus not allowing other
conversations to occur. If you have problems with users abusing the channel, then
you might use this!
SEE ALSO Time-Out Timer
PROGRAMMING PROCEDURE
1. Press F4 at the MAIN MENU to get to the
CHANGE/VIEW CODEPLUG MENU.
4. Use the ↑ ↓ arrow keys to select the desired
TOT Rekey Time value.
2. At the CHANGE/VIEW CODEPLUG MENU,
press F2 to get to the RADIO WIDE CONFIGU-
RATION screen.
3. At the RADIO WIDE CONFIGURATION screen,
press Tab (or Enter or Return) key until the
TOT Rekey Time field is highlighted.
MAIN
MENU
RADIO
screen
WIDE
field
TOT Rekey Time
➠
F4
➠
F2
➠
Tab
CHANGE/
VIEW
To Next Page
Loading...
Need help?
General
