R&S NRP P Series - Sense<Sensor>:Trace:measurement:power:hreference; Sense<Sensor>:Trace:measurement:power:lreference; Sense<Sensor>:Trace:measurement:power:max; Sense<Sensor>:Trace:measurement:power:min

Remote control commands
R&S
®
NRPxxP
104User Manual 1179.5760.02 ─ 02
SENSe<Sensor>:TRACe:MEASurement:POWer:HREFerence?
Queries the power level at high reference level set by SENSe<Sensor>:TRACe:
MEASurement:DEFine:TRANsition:HREFerence.
Usage: Query only
SENSe<Sensor>:TRACe:MEASurement:POWer:LREFerence?
Queries the power level at low reference level set by SENSe<Sensor>:TRACe:
MEASurement:DEFine:TRANsition:LREFerence.
Usage:
Query only
SENSe<Sensor>:TRACe:MEASurement:POWer:MAX?
Queries the maximum power measured within the analysis window. Unit: Watts.
Usage:
Query only
SENSe<Sensor>:TRACe:MEASurement:POWer:MIN?
Queries the minimum power measured within the analysis window. Unit: Watts.
Usage:
Query only
SENSe<Sensor>:TRACe:MEASurement:POWer:PULSe:BASE?
Queries the pulse base power level detected by the selected analysis algorithm,
SENSe<Sensor>:TRACe:MEASurement:ALGorithm. This value is used as a refer-
ence (0 %) to determine other parameter values such as the rising or falling thresholds.
Usage:
Query only
Querying measurement results