Raymarine C140w - Waypoints

9.9Waypoints
Placingawaypointatthecursorposition
1.PresstheWPTSMOBbutton.
2.Movethecursortothepositiononthechartwhereyouwant
thewaypoint.
3.PresstheWAYPOINTATCURSORsoftkey.
4.PressOKorwait4seconds.
Placingawaypointatyourvessel’sposition
1.PresstheWPTSMOBbutton.
2.PresstheWAYPOINTATVESSELsoftkey.
3.PressOKorwait4seconds.
4.Alternatively,presstheWPTSMOBbuttontwice,andthenpress
OK.
Placingawaypointataknownposition
1.PresstheWPTSMOBbutton.
2.PresstheWAYPOINTATLAT/LONsoftkey.
3.EntertheLatitude/Longitudeposition..
4.PressOKtwice.
Hidingawaypointontheradardisplay
Intheradarapplication:
1.PressthePRESENTATIONsoftkey.
2.PresstheSHOW/HIDEWAYPOINTSsoftkey.
3.PresstheONRADARsoftkeyrepeatedlyuntiltheHIDEoption
isselected.
4.PresstheOKbutton.
Displayingthewaypointlist
1.PresstheWPTS/MOBbutton.
2.PresstheREVIEWANDEDITWAYPOINTSsoftkey.
120C-SeriesWidescreenuserreference