Raymarine C140w - Waypoints

6.11Waypoints
Waypointnavigation
Navigatingtoawaypointusingthecursor
Inthechartapplication:
1.Positionthecursoroverthewaypointyouwanttonavigateto.
2.PresstheGOTOWAYPOINTsoftkey.
NavigatingtoawaypointusingtheGOTOoption
Inthechartapplication:
1.PresstheGOTOsoftkey.
2.PresstheGOTOWAYPOINTOPTIONSorGOTOCURSOR
softkey,asappropriate.
3.Selecttherequiredwaypointfromthelist.
4.PresstheGOTOWAYPOINTsoftkey.
Navigatingtoanexistingwaypointselectedonscreen
Inthechartapplication:
1.Positionthecursorovertherequiredwaypoint.
2.PresstheGOTOWAYPOINTsoftkey.
Thechartdisplaysadashedlinefromyourvesseltotheactive
waypoint,andnavigationcommences.
Note:Whenyouarriveatyourtargetwaypoint,amessage
willappear,andanalarmwillsound.T oacknowledgethe
messageandsilencethealarm,wait10secondsorpress
ACKNOWLEDGE.
Tostopnavigatingtoawaypoint
1.PresstheWPTS/MOBbutton.
2.PresstheGOTOWAYPOINTOPTIONSsoftkey.
3.PresstheSTOPGOTOsoftkey.
4.Alternatively,positionthecursorovertheactivewaypoint,and
presstheSTOPGOTOsoftkey.
Note:Oncenavigationisnolongeractive,thewaypointsymbol
returnstoitsnormalunboxedstate,andthedashedlinebetween
yourboatandthewaypointisremoved.
Waypointediting
Movingawaypointbyenteringnewcoordinates
Inthechartapplication:
1.Usingthetrackpad,movethecursortotherelevantwaypoint.
Alternatively,selectawaypointfromtheWaypointList.
2.PresstheVIEWANDEDITDETAILSsoftkey.
3.Usingtherotarycontrol,highlighttheinformationyouwantto
change.
4.PresstherelevantEDITsoftkey.
5.Usingtherotarycontrolandtrackpad,edittheinformationinthe
Position,BRG,andRNGeldsasappropriate.
6.PresstheOKbuttononcetoapplythechangesandtwiceto
exittheEditWaypointdialog.
Note:T oabandonamovewaypointoperation,pressCANCEL.
Erasingawaypointusingthecursor
Inthechartapplication:
Usingthechart
73