Raymarine C140w - Initial Setup Procedures

Status
iconDescription
Thescannericonindicatesthecurrentstatusofyourradar
scanner:
•Iconrotates:thescanneristransmitting(TRANSMIT/TX
mode).
•Iconstatic:thescannerispoweredonbutisnotcurrently
transmitting(STANDBYmode).
•Icongreyed-out:thisindicatesthatthescanneriscurrently
poweredoff(OFFmode).
•Iconrotatesandisthenstatic:apowersavemodeinwhich
thescannerpowerson/offintermittently(TIMEDTRANSMIT
mode).
----
Note:TherearealsoadditionalstatusiconsforAISandAutopilot
functionality.Theseiconsaredescribedintherespective
chapters.
3.7Initialsetup
Initialsetupprocedures
Anumberoftasksmustbecompletedbeforeyouuseyourdisplay
forthersttime.
Whenyourstuseyourmultifunctiondisplayafterithasbeen
commissioned(seeInstallationGuide),werecommendthatyou
carryoutthefollowing:
•Setthelanguage,thedateandtimeformatandpreferredunits
ofmeasurement.
•Adjustthedisplaylighting.
Settingthelanguage,date/time,andunitsofmeasurement
1.PresstheMENUbutton.
2.Usingthetrackpad,highlighttheSystemSetupmenuitem.
3.PressrightonthetrackpadtoentertheSystemSetupmenu.
4.Usingthetrackpad,highlighttherequiredsetupitemfromthe
menu.
5.Usingthetackpadandrotarycontrol,adjustthevaluesforthe
setupitem.
6.RepeatSteps4and5foreachsetupitem(Language,Date/Time/
UnitsofMeasurement)thatyouwanttochange.
Adjustingthedisplaylighting
1.PressthePOWERbuttononce.Thebrightnesslevelcontrolis
displayed.
2.Usingtherotarycontrol,adjustthebrightnesslevelasrequired.
Gettingstarted
25