Raymarine C140w - Waypoint Groups

5.7Waypointgroups
Providedthatyouhavenotchangedthedefaultgroup,allwaypoints
areautomaticallyplacedinthedefault“MyWaypoints”group
whentheyarecreated.Inordertomakeyourwaypointseasierto
manage,youcanorganizethemintogroupsofyourchoice.When
shing,forexample,youmayonlywishtoseethewaypointsthat
indicategoodshingsites.Otherwaypoints,say,forracing,would
besuperuousatthistime.
Note:Awaypointcannotbeplacedinmultiplegroups.
Displayingthewaypointgrouplist
1.PresstheWPTSMOBbutton.
2.PresstheREVIEWANDEDITWAYPOINTSsoftkey.
3.PresstheWAYPOINTGROUPSsoftkey.
TheWaypointGroupListisdisplayed.
Makinganewwaypointgroup
1.DisplaytheWaypointGroupList:
i.PresstheWPTSMOBbutton.
ii.PresstheREVIEWANDEDITWAYPOINTSsoftkey.
iii.PresstheWAYPOINTGROUPSsoftkey.
2.PresstheMAKENEWGROUPsoftkey.
3.PresstheEDITGROUPNAMEsoftkey(orpressOKtoaccept
thedefaultname).
4.Usingtherotarycontrol,editthenameforthenewwaypoint
group.
5.PresstheOKbuttontosavethechanges.
Movingwaypointsbetweengroups
1.DisplaytheWaypointGroupList:
i.PresstheWPTSMOBbutton.
ii.PresstheREVIEWANDEDITWAYPOINTSsoftkey.
iii.PresstheWAYPOINTGROUPSsoftkey.
2.Usingthetrackpad,selecttheappropriatewaypointgroupfrom
thelist.
3.PresstheMOVEBETWEENGROUPSsoftkey.
4.PresstheSELECTGROUPAsoftkey.
5.Usingtherotarycontrol,selectthewaypointgroupthatcontains
thewaypointyouwanttomove(knownasGroupA,orthe
“source”).
6.PresstheOKbutton.
7.Pressthetrackpadrighttoselectthewaypointgroupthat
youwanttomovethewaypointto(knownasGroupB,orthe
“destination”).
8.IftheGroupBlistdoesnotcontainthewaypointgroupyouwant
tomoveyourwaypointto,presstheSELECTGROUPBsoftkey,
andusetherotarycontroltoselecttherequiredgroup.
9.PresstheMOVEWAYPOINTFROMsoftkey.
Thewaypointismovedtothenewgroup.
Changingthedefaultwaypointgroup
1.PresstheWPTSMOBbutton.
2.PresstheREVIEWANDEDITWAYPOINTSsoftkey.
3.PresstheSETDEFAULTSYM&GROUPsoftkey.
4.PresstheEDITDEFAULTsoftkey.
5.Usingthetrackpad,selectthewaypointgroupthatyouwantto
makethedefault.
6.PresstheOKbutton.
46C-SeriesWidescreenuserreference