Raymarine C140w - Data Transfer and Networked Displays

4.3TransferringdatausingaPC
Youcantransferwaypointsorroutestoandfromyourdisplayanda
PCorinstrument,usingNMEA.
WiththeRayT echV6.0(orlater)softwareyoucantransferwaypoints
androutesviaaCompactFlashmemorycard.Suchtransfers
requirethatthePCisconnectedtothedisplay’sNMEAportvia
aserialdatacable.
Transferringwaypointandroutedata
1.PresstheDATAbutton.
2.PresstheARCHIVEANDTRANSFERsoftkey.
3.PresstheTRANSFERONNMEAsoftkey.
4.PresstheappropriatesoftkeytosendorreceiveNMEAdata.
Note:TheTRANSFERONNMEAsoftkeyisonlyavailablewhen
compatibleNMEAequipmentispoweredonandconnectedto
yourmultifunctiondisplay.
4.4Operatinganetworkeddisplay
Youcanconnectanadditionalmultifunctiondisplayforamore
exibleandaccessiblesystem.
Ifyouhavemultifunctiondisplaysconnectedtogether(usinga
crossovercoupleroraSeaT alk
hs
switch),youcaninput,edit,and
viewdataacrossalldisplays.However,therearesomefunctions
andsettingsthatarenot’seen’orsharedbyalldisplaysonyour
network.Theseexceptionsaredetailedbelow.
Exceptions
Thefollowingfunctionsandlocalsettingsonlyaffectthe
multifunctiondisplaythatyouarecurrentlyusing:
•Video—thepicturefromanyvideo/camerasourcewillonly
beshownonthedisplaythatthevideo/cameraisphysically
connectedto.
•Pageset—selectingaset,name,andapplicationsforaparticular
page.
•PowerOn/Offbutton(includingDay/Nightsettings).
•TheACTIVEwindowfunction.
•ThedisplayedpanelintheDataandEngineDataapplications.
•RadarandFishnderpresentationsettings.
•RadarVRMs,EBLs,andWakes.
•ChartpresentationsettingswhentheChartViewissettoLOCAL.
•Show/hidewaypoints,routes,ortracks.
•FishnderSetupMenuoptions(excludingTransducerSettings
andDSMSettings).
•Video,Databar,andDisplaySetupmenus.
•Databaron/offandconguration.
•Rulersettings.
Managingdisplaydata
37