Note:WhencreatingtherstVRM/EBL,itwillbeplacedata
locationof1/3ofthecurrentrangeand030°relativetoyour
boat’shead.Ifthissettingisadjusted,thedisplaywillretainthe
adjustmentsandusethemwhentheVRM/EBLisnextenabled.
UnoatingaVRMorEBLontheradardisplay
1.IntheRadarapplication,presstheVRM/EBLsoftkey.
2.PresstheFLOATINGsoftkey(VRM/EBLmustbeswitchedON).
3.PresstheCENTERsoftkey.
4.PresstheOKbutton.
Usingtheradarrangerings
Radarrangeringsenableyoutomeasurethedistancebetween
twopointsontheradardisplay.
Usetherangeringstogaugetheapproximatedistancesbetween
points.Rangeringsareconcentriccirclesdisplayedonthescreen
andcentredfromyourboatatpre-setdistances.Thenumberand
spacingoftheringschangesasyourangeinandout.
Enablinganddisablingradarrangerings
1.Intheradarapplication,pressthePRESENTATIONsoftkey.
2.PresstheRANGERINGSsoftkeyuntiltheONorOFFoption
isselected,asrequired.
9.11Usingradartotracktargetsand
avoidcollisions
Thereareanumberofradarfunctionstohelpyoutracktargetsand
avoidcollisions,includingGuardZones,MARPA,andAIS.
Witharadarconnectedtoyourmultifunctiondisplay,youcan:
•Assesshowfarawayatargetisanditsbearing(VRMs/EBLs).
•Setanalarmtotriggerwhenatargetiswithinaspeciedzone
(GuardZones).
•Displaydetailedinformationontrackedtargets(MARPA).
•Displaytheidentityofothervesselsandifbroadcasted,their
voyageinformation(AIS).
•Displaytherangeandbearingofatarget.
Settinguparadarguardzone
1.IntheRadarapplication,presstheTARGETTRACKINGsoftkey.
2.PresstheMONITORINZONESsoftkey.
3.PresstheZONE1orZONE2softkey(asappropriate)untilthe
ONorOFFoptionisselected.
4.PresstheSETUPZONE1orSETUPZONE2softkey,as
appropriate.
5.PresstheZONESHAPEsoftkeyuntiltheSECTORorCIRCLE
optionisselected,asrequired.
6.PresstheSETINNERsoftkeyuntilitishighlighted.
7.Usingtherotarycontrol,settheinnerlimitfortheguardzone,
asappropriate.
124
C-SeriesWidescreenuserreference