Raymarine C140w - Editing and Protecting Waypoints

5.6Editingawaypoint
Onceawaypointhasbeenplaceditcanbeeditedinavarietyof
ways.Youcan:
•Changethewaypointdetails-name,symbol,grouporadda
comment.
•Moveawaypoint.
•Eraseawaypoint.
•Changethedefaultsymbolandgroupofnewlyplacedwaypoints.
Changingwaypointdetails
Inthechartapplication:
1.Usingthetrackpad,movethecursortotherelevantwaypoint.
Alternatively,selectawaypointfromtheWaypointList.
2.PresstheVIEWANDEDITDETAILSsoftkey.
3.Usingtherotarycontrol,highlighttheinformationyouwantto
change.
4.PresstherelevantEDIT...softkey.
5.Usingtherotarycontrolandtrackpad,editthedetailsineach
eldasrequired.
6.PresstheOKbuttononcetoapplythechangesforasingleeld,
andtwicetoexittheEditWaypointdialog.
Note:Ifyoumakeaneditingmistake,pressCANCEL.
Changingawaypointsymbol
Inthechartapplication:
1.Usingthetrackpad,movethecursortotherelevantwaypoint.
Alternatively,selectawaypointfromtheWaypointList.
2.PresstheVIEWANDEDITDETAILSsoftkey.
3.PresstheEDITSYMBOLsoftkey.
4.Usingthetrackpad,highlighttherequiredsymbolinthelist
5.PresstheOKbutton.
Movingawaypoint
Movingawaypointusingthecursor
Inthechartapplication:
1.Usingthetrackpad,movethecursortotherelevantwaypoint.
2.PresstheMOVEWAYPOINTsoftkey.
3.Usingthetrackpad,dragthewaypointtothedesiredlocation.
4.PresstherelevantPLACEWAYPOINTsoftkey.
Note:T oabandonamovewaypointoperation,pressCANCEL.
Movingawaypointbyenteringnewcoordinates
Inthechartapplication:
1.Usingthetrackpad,movethecursortotherelevantwaypoint.
Alternatively,selectawaypointfromtheWaypointList.
2.PresstheVIEWANDEDITDETAILSsoftkey.
3.Usingtherotarycontrol,highlighttheinformationyouwantto
change.
4.PresstherelevantEDITsoftkey.
5.Usingtherotarycontrolandtrackpad,edittheinformationinthe
Position,BRG,andRNGeldsasappropriate.
6.PresstheOKbuttononcetoapplythechangesandtwiceto
exittheEditWaypointdialog.
44
C-SeriesWidescreenuserreference