Raymarine C140w - Page 70

3.PresstheAnimatesoftkey.
TheTide/CurrentAnimationscreenopenswiththeanimation
paused.
Controllingtideandcurrentanimations
Inthechartapplication,withatideanimationdisplayed:
1.T ostartorstoptheanimation,presstheANIMATION
PLAY/PAUSEsoftkey.
2.T oviewtheanimationinsteps,usetheSTEPBACKorSTEP
FWDsoftkeys.
3.T osettheanimationstepinterval,pauseanyplayinganimations,
andpresstheSETTIMEINTERVALsoftkey.
4.T osettheanimationdate,presstheSETDATEsoftkey.TheEdit
Datescreenshowsthefollowingoptions:
TODAY’S
DATE
Settheanimationdatetothecurrentdate.
PREVDATE
Settheanimationdateto24-hourspreviousto
currentdate.
NEXTDATE
Settheanimationdateto24-hoursaheadof
currentdate.
EDITDATE
OpenstheEditDatepop-upscreen:usethe
trackpadorrotarycontroltoenterthedateyou
wanttoseeananimationfor.
5.PressOKtosavethenewdateandreturntotheTide/Current
Animationscreen,orCANCELtoignorethedatechangeand
returntotheTide/CurrentAnimationscreen,leavingthedate
settingunchanged.
Additionalchartinformation
Youcandisplayadditionalinformationonthechartforcartographic
objects,ports,andmarinas.
Dependingonthechartcardyouareusing,youwillalsobeableto
viewsomeorallofthefollowingadditionalinformation:
•Detailsofeachcartographicobjectthatismarkedonthechart,
includingsourcedataforstructures,lines,openseaareas,and
soon.
•Detailsofports,portfeatures,andbusinessservices.
•Pilotbookinformation(similartowhatyouwouldseeinamarine
almanac).Pilotbookinformationisavailableatcertainports.
•Panoramicphotosofportsandmarinas.Theavailabilityofphotos
isindicatedbyacamerasymbolonthechartdisplay.
Note:Forfulldetailsofthefeaturesavailablewitheachchart
cardtype,refertotheNavionicswebsite:www.navionics.comor
www.navionics.it.
Usingtheportsearchoption
Inthechartapplication:
1.PresstheOKbutton.
2.PresstheSEARCHBYNAMEsoftkey.
3.PresstheEDITNAMEsoftkey.
4.Enterthenameoftheport,andpresstheOKbutton.
5.PresstheSEARCHsoftkey.
6.Ifthesearchreturnsmorethanoneport,highlighttherequired
port,andpressrightonthetrackpadtoselectit.
7.Usethetrackpadtoselectaserviceassociatedwiththatport.
Usingthecursortondaport
Inthechartapplication:
70C-SeriesWidescreenuserreference