APPLICATION NOTE
R01AN3841ED0110 Rev. 1.10 Page 1 of 108
August 8, 2019
RH850/F1Kx, RH850/F1K Series
Hardware Design Guide
Introduction
This application note is intended to provide RH850/F1Kx, RH850/F1K series specific information and
recommendations on the device usage. It should be used in conjunction with the corresponding RH850/F1Kx,
RH850/F1K series user manual (includes the electrical characteristics).
Target Device
RH850/F1Kx Series
• RH850/F1KM Group
o RH850/F1KM-S1
100pin
80pin
64pin
48pin
o RH850/F1KM-S4
272pin
233pin
176pin
144pin
100pin
• RH850/F1KH Group
o RH850/F1KH-D8
324pin
233pin
176pin
• RH850/F1K Series
o RH850/F1K Group
176pin
144pin
100pin
Disclaimer:
Renesas Electronics does not warrant the information included in this document. You are fully responsible for
incorporation of these circuits, software, and information in the design of your equipment and system. Renesas
Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these
circuits, software, or information.
R01AN3841ED0110
Rev. 1.10
August 8